Agriculture Engineering One Liner Questions for UAF Entry Test

Agriculture Engineering One Liner Questions for UAF Entry Test
Agriculture Engineering One Liner Questions for UAF Entry Test

Agriculture Engineering One Liner Questions. Agriculture Engineering One Liner Questions for UAF Postgraduate Entry Test Preparation. Agriculture Engineering One Liner Questions for UAF GAT Test. Agriculture Engineering One Liner Questions for GRE Test.

StatementAnswer
Contour lines_______________Must close within or outside of the map
The type of error when line of the sight is not parallel is known as—————-Collimation error
The height of the point above the datum is known as———————–Reduced level
The point which has back sight as well as the fore sight data is known as——————-Change point
In case the line of the collimation is not the horizontal due to the improper adjustment then———————–Error will be proportional to the distance between the points at which the reading was taken from the instrument
What is the loop misclosure if the length of loop is the 5000 foot————?14.8 millimeter
During leveling operation in the loop, it was observed that the new height of the 100 meter Benchmark was the 99.87 meter. the apparatus was shifted five times. What would be the adjustment for the 3rd setup———————–?-78 millimeter
During leveling operation in the loop of 10 kilometer, it was observed that the new height of 100 meter Benchmark was the 99.9 m. which statement will be the true——————–The misclosure is 100 millimeter whereas the allowable misclosure was 37.9 millimeter so there is no need of adjustment of error
Height of the contour line from the some reference of the MSL is known as——————-Contour level
Difference between the levels of the consecutive contour lines————-Contour interval
Can the contour lines intersect—————?Yes in case of overhanging vertical cliff
If the volume calculated by the trapezoidal formula is 2578 cubic meter and by prismoidal formula is 2600 cubic meter then prsimodial correction is the———————–The data set given has some error
Difference between the theodolite and the auto level is the—————–Theodolite can measure horizontal as well as vertical angles whereas auto level can only measure horizontal angles
Ground level is the 50 meter at the starting point and after the 220 meter it is 55 meter. Find the depth of the cutting & filling at 220 meter if the formation level is 0.6 meter above the ground level at the starting point with the uniform gradient of 1 in 50—————————-Data is not complete
The Differential leveling the——————–Is done to transfer bench mark
The plane table is used when the contouring is done by the—————–Radial line method
Staff rods which is used now the days are made of the—————-Aluminum
While the drawing the profile finished level—————–Is always above the formation level
In the adjusting the loop misclosure——————–It is assumed that there is a uniform slope between the corners depending upon the RL and distance between the corner points
In the grid method of the contouring——————-It is the assumed that all the sides of grid has uniform slopes that may vary depending upon
During estimation of the cut and fill if A is existing Grid elevation and the B is new Grid elevation then the———————-There will be the cut if A>B equal to A-B
The based on duration, explosion is categorized as the—————–Impact noise
The Traffic noise and the construction noise has one common thing—————-Both belong to continuous noise category
In the public address system, the noise can be controlled——————By focusing loud speaker towards audience
In the Construction activities, the noise can be controlled by the——————Constructing temporary earth bund around the site using the soil
Which type of the construction is not included as the Public Work——————–?Utility stores
The Sub steps suggested for the land use map development——————-Draw noise contour map. Subdivide the noise contours into noise zones
The Noise control measures for the roads & highways include the—————-Absorption effects of the landscaping
The Mitigation measures for the noise control refers the—————Minimize the magnitude of detrimental noise impacts
Which is not the factor for the soil formation———————–?Vehicles
What are direct causes of the land degradation—————?Land filling of wastes
The over utilizing of the lands include the——————-The process of the diminishing returns to land is in operation, and there is no natural recovery of its fertility.
The impacts of projects on the soil properties and processes can include the—————Pollution
The Environmental impacts can be categorized as the——————–Secondary impacts are those that are indirectly induced and typically include the associated investment and changed patterns of the social and the economic activities by the proposed action.
The Pertinent mitigation measures for the soil and the groundwater impacts include the———————-Liners could be used to provide the physical barrier to limit the movement of contaminant materials from waste disposal sites into and through the subsurface environment
The point source of the pollution is known as the——————–Discrete source
The ETPs refer to the——————Effluent treatment plants
Which color coding is used for the drinking purpose water—————?Blue
Which are not the physical parameters of the water quality——————?Total organic carbon
The total solids in water may be divided into the—————Suspended and dissolved solids
Which methods are useful to study impact on the water environment—————–?Matrix approach
Which approach can be used for the impact predicted of project on the water environment——————-?Environmental indexing methods such as WQI
How many steps are involved in the EIA of the project on the water environment———————?6
What is the last step of the EIA of the project on the water environment———————-?Impact mitigation measures
Why the EIA is needed—————-?It is a mandatory legal requirement
What are the benefits of the EIA—————?It will Protect Environmental and Human Health
The PEPA implemented in the—————-1997
The NIAP stands for the—————-National Impact Assessment Programme
The IUCN stands for the————International Union for Conservation of Nature
The IEE stands for the——————–Initial Environmental Examination
After the 18th amendment, the EIA as part of the EPA is under the————-Ministry of Climate Change
In the extrapolative method of the impact prediction includes the———————Prediction based on past and present data
Which model is used to predict impacts over the time and the space——————–?Geographic model
Prediction made by using the various approach—————–Have some uncertainty
The Criterion and standard are the————–Different
Which is not the true about the engineering drawing————————–?It’s an illustration of all parts of machine.
We use the scaling in the Engineering drawings because the—————Engineering objects are too large
The drawing drawn without using the instruments other than the pencils and the erasers known as——————-Freehand drawing
For making the angles ——————- the instrument is usedCompass
Protector (Both these are correct
—————-the line is used to show the internal detail of the objectHidden line
————— the Instruments is used to draw the parallel linesT-Square
Most appropriate method of the dividing the line into equal parts is by using the——————-Compass
Most appropriate method for the drawing Ellipse is the—————-4-Center method
If the eccentricity value is approaching 0 it represents the ———————-shape?Circle
Which one is not the synthetic material——————?Wood
Which one is not affecting the strength of the concrete—————–?Stress
The Normal standard level for the city traffic is the—————–70-80 dB
When there is the high ground water then which method of the land fill is suitable——————-b- area
The wastes that will decompose rapidly especially in the warm weather are known as the—————–Putrescible waste
The space used for storage of the grains——————Farm stead
The closing error in the closed traverse is adjusted by the———————Bowditch’s rule
The magnetic bearing of the line is measured clockwise from the ———————-upto line in the whole circle bearing systemNorth
The Mixture of the wastes is known as the—————-Commingled solid waste
The Biological transformation of the solid waste involves the————-Anaerobic Digestion Combustion
The ratio of the actual vapor pressure to the saturation vapor pressure is known as the—————-Relative humidity
The forces which have the same line of the action are known as the—————-Collinear forces
The relative movement between the cross hairs and the staff reading is called————–Parallax
In which the phase the microbial activity is accelerated with the production of the organic acids and lesser amount of the hydrogen————–Acid phase
—————— is the unit operation in which collected waste materials are mechanically reduced in the sizeSize reduction
Most dangerous factor for the storage of the grains is the—————-Rodents
When the curvature of the earth is not taken into the consideration then it is known as the——————–Plane surveying
The mixture of the lime stone and the clay is known as the—————Cement
The ratio between the volumetric stresses to volumetric strain is known as the——————-Rigidity modulus
The Water logging is the source of the——————Soil pollution
The Inaccessible points may be located by————————Intersection method
The Synthetic organic compounds and the metals contained in the Bio solids are the——————–Selenium
Nickel
Mercury d (All these are correct)
The water present underground surface is greater than the water on the ground surface about the—————–38 times
———————indicates the shifting of instrumentChange point
Which gases have the major contribution in the producing Global Warming—————–?Carbon dioxide, methane, nitrous oxide
Which of following is the Active Remote sensor——————?RADAR
LIDAR (Both these are correct)
The vegetable waste is the type of the—————–Biodegradable waste
—————-is provided when the landfill site is filled to its full capacityFinal Cover
The convenient direction is assumed as the meridian for the survey of the small area called——————Arbitrary meridian
Temperature at which the ash resulting from the burning will form the clinker——————–Fusion point
Physical properties of the MSW are the—————–Specific weight
The feasibility of the combustion of the solid waste depends on the ——————–Chemical properties
Assumed several lines parallel to the true meridian for the particular zone——————Grid meridian
The Agricultural residues includes the—————–Farmyard
The mostly used material at the farm house is the————Wood
Agriculture Engineering One Liner Questions

Leave a Reply

Your email address will not be published. Required fields are marked *

UAF Agriculture Economics Mcqs for Entry Test Preparation Part-1

UAF Agriculture Economics Mcqs for Entry Test Preparation Part-1

Agriculture Extension One Liner Questions for UAF Entry Test

Agriculture Extension One Liner Questions for UAF Entry Test